Toyota Van Wagon Camper Conversion Part 1
Since the last time I posted, I bought a van. A 1985 Toyota Van, yes, that’s the model name, Van. Oh, the simpler times. The purpose of this van is a camper, a weekend getaway machine. Will I live in it? Probably not long term, maybe short term but this is more of a weekend machine. Sorry #vanlife Nazis, if this isn’t hardcore enough, move on.
Vehicle: 1985 Toyota Van 2WD
Odometer Reading: 195,xxx
This post will be broken into three sections.
- Why I chose an 80’s Toyota Van.
- What mechanical work I’ve done on it.
- An update on where the conversion is at the moment.
Why the heck did I choose a 1985 Toyota Van?
1. Looks like a spaceship, number one reason, yup.
2. Toyota’s are known to be reliable. You see many Toyota’s with 200-300k miles.
3. Widely available in stick, the only way to go in my opinion on these older cars with 4 cylinder engines.
4. Good space inside the van.
5. Pretty cheap to buy, got mine for 1500. Beats blowing a ton of cash on a sprinter.
6. Parts are widely available, great when hopefully traveling to Baja!
7. Pretty good clearance for 2WD, I can give it an oil change without putting it on a jack stand.
8. Rain gutters for easy rack installation.
Some of the cons I’ve noticed.
1. To access the engine, you have to lift the drivers seat up and access in general to certain parts is restricted. It limits what you can do behind the seat and the seats can’t be made to swivel towards the back.
2. Depending on the previous owner, you may need to replace some parts initially.
3. Stock temp gauge can be inaccurate.
4. Obviously not as much headspace or space in general as a Sprinter or pop top.
6. limited power
What mechanical work have I got done on the van since purchasing it?
1. Clutch was toast, if the person won’t let you test drive it, there may very well be a reason. Replaced the clutch, always go OEM with these Toyota Vans. This was done by a mechanic in a shop.
2. I thought the van was running hot and I didn’t know if the fan clutch and water pump were fully functioning (turns out they were fine, the temp gauge wasn’t reading accurately). So, I replaced the water pump and fan clutch, got that out of the way and at least I know that’s new. Thought about doing this myself but just had a mechanic install the parts for me.
3. New aftermarket digital temp gauge that told me my van was running at a perfectly normal temperature. I installed this myself.
4. Replaced the spark plugs with iridium plugs.
5. Gave it an oil change right away, full synthetic.
6. Coming soon – Needs a new brake master cylinder, just need to pull the plug on this one before I do any extended driving.